Wednesday, 21 November 2012

How do I make my scrunchie?


How do I make my scrunchie?




I would like to share "how to make a scrunchy". I know you are able to find any good tutorials. But I would like to share this and would like you to know how my scrunchie is nice ; )

Finished Measurement : appx. 18inches round x 1 and a half inches flat width

Materials :
1/2 yard x 4 inches of fabric (including 1/8 inches margin)
Hand sewing thread
Appx 9" elastic

Tools :
Hand sewing needle (Or if you like, sewing machine)
Elastic threader (or safety pin can be alternative)
Pins


1. fold half and stitch the ends

1.
Place the fabric inside out and fold it into half.
Stitch the ends. I always start and end with
double stitching (backing stitching ).
2. roll or fold upper layer

2. Place the seam (which you sew 1.) in
the centre. This is because we would like
to start from the around of the seam.
Fold the upper layer just like the right photo.
 
3. wrap the "fold" by outer layer
 3. Wrap the folded fabric by the outer fabric. 
4.meet edges
of outer layer
4 .  Put the top and bottom edges of
the outer layer together.
5. meet the corner
too
5. Take care the inside fabric and to meet
the corner of the seam.
6. pin
6. Pin every inches or less
7. every inch
or less
7. If there are any remarkable patterns and
if possible, we have to adjust and fix the
pattern meets neatly.
8. start stitching
8. Start stitching and make it a tube ring.
I always start from a half inches back from
the seam (which we sewed at the step 1.)
*This is because we would like to hide any "seams"
when we wear it. Although we will try the "opening"
to be unremarkable. Please see the later steps.

Also, be careful not to stitch the inside fabric. 
9. keep the margin
& short rest
9. Keeping appx. 1/8 inches margin from the
edges. Continuing sewing, come to the short left, 
10. pull the
"inside folding" out 
10. pull out the inside fabric. 
11. Continue
to the "almost end"
11. there we have more miles to go....
12. "Almost"
coming back to the starting point

12. There you can see the starting point.
Left the opening/mouth a inch or two from
the starting, make an end.
13. backing stitching
 13. I make an end by double stitching
--stitch back and forth.
14. Take out the inside fabric from the mouth.
15. Right side
will be shown
15. Now you see the right side of the fabric.
You made a tube ring.
16. use elastic
threader
16. Now, we are going to thread a elastic
from the opening mouth. You can substitute
a safety pin.
17. Insert the
elastic threader from the mouth
17. Insert the threader from the mouth.
18. pin the other
end of the elastic
18. If it would be any help to thread the
elastic easily, pin the other end of the elastic
around the mouth.
19. threading
19. threading
20. Threader come back to the mouth, 
21. sew the ends
of the elastic
21. stitch the elastic's both ends. Of course
you can tie them. But I do not want make
knot which might be any uncomfortable.
22. close the
mouth
22. Now we have to close the opening mouth.
23. closing simply
23.
You can close the mouth simply. But I like it
to be a "unremarkable" mouth. So,
I use a "technic".



24.-1 Start from
inside
24. I am sure European style stitching have
same technic. But I do not know how to say
in English. Treading from inside and start. 
 24-2.Sew one stitch and come across
the fabric. 
24-3 And sew one stitch, go across the fabric,,,
and continue to the end.
"One stitch" is always under the fabric. Thread come (and go) across at
the same level.







25. Make a knot at the end of the mouth and threading inside. Pull the thread strongly, then you can hide the knot.
Threading out the needle bit far from the mouth, and cut the thread.


FISHISH!!!!






No comments:

Post a Comment